*Free Shipping*
*A Representative will reach out upon purchase to confirm color•
Benjamin Moore® Regal Select® Interior Paint is the brands long time trusted series for over 50 years. Regal Select® is not infused with Benjamin Moore® proprietary Gennex® colorant and a new high-performance resin, giving it an edge over the competitors comparable products. Benjamin Moore® Regal Select® interior paint is available in flat, eggshell, pearl, and semi-gloss, as well as any color.
Features Of: Benjamin Moore® Regal Select® Interior Latex Paint
- Paint and Primer Together
- Stain release technology that is easy to clean with less scrubbing
- High-performance 100% acrylic resin
- Highly washable
- Easy application
- Fast recoat time
- Great coverage
- Excellent adhesion
- Available in any color
- Outstanding durability
- Mildew- and fade-resistant
- Low VOCs (<50 g/L) even after tinting
Recommended For: Residential or commercial high traffic applications where a premium quality matte finish is desired. New or previously painted wallboard, plaster, masonry, or wallpapered surfaces; primed or previously painted wood or metal; new or coated acoustic ceilings.
Coverage: 400-450 sq.ft./gal
Dry Times:
- To touch: 1 hour
- Recoat: 1-2 hours
More Information:
- Available Colors: Available in thousands of colors, Ready Mix White, Ready Mix Black*
- *Limited availability
- Sheen (or Gloss): Matte
- Cleanup: Soap and Water
- Resin Type: Proprietary 100% Acrylic
- Recommended Use: Interior
- MPI Rating: 53
- VOC Level: 0.0
Primer/Finish Systems:
Regal Select® Interior Latex Paint is self-priming on most surfaces. On bare substrates two coats are required; previously painted surfaces can be finished with 1 or 2 coats.
Wood and Engineered Wood Products: Primer: Fresh Start® Multi-Purpose Latex Primer (N023) or Fresh Start® High-Hiding All Purpose Primer (046) Finish: 1 or 2 coats Regal Select® Interior Latex Paint, Primer: Fresh Start® Multi-Purpose Oil Based Primer (024) or 1-2 coats of Fresh Start® High-Hiding All Purpose Primer (046) Finish: 1 or 2 coats Regal Select® Interior Latex Paint
Drywall: Primer/Finish: 1 or 2 coats of Regal Select® Interior Latex Paint Plaster: Primer/Finish: 1 or 2 coats of Regal Select® Interior Latex Paint
Rough or Pitted Masonry: Primer: Ultra Spec® Masonry Interior/Exterior Hi-Build Block Filler (571) Finish: 1 or 2 coats Regal Select® Interior Latex PaintSmooth Poured or Precast Concrete: Primer/Finish: 1 or 2 coats of Regal Select® Interior Latex Paint
Ferrous Metal (Steel and Iron): Primer: Ultra Spec® HP Acrylic Metal Primer (HP04) or Super Spec HP® Alkyd Metal Primer (P06) Finish: 1 or 2 coats Regal Select® Interior Latex Paint
Non-Ferrous Metal (Galvanized & Aluminum): All new metal surfaces must be thoroughly cleaned with an Oil & Grease Emulsifier Corotech® V600 to remove contaminants. New shiny non-ferrous metal surfaces that will be subject to abrasion should be dulled with very fine sandpaper or a synthetic steel wool pad to promote adhesion. Primer/Finish: 1 or 2 coats of Regal Select® Interior Latex Paint
Repaint, All Substrates: Prime bare areas with the primer recommended for the substrate above.
Application:
Mixing of Paint: Stir thoroughly before and during use. Apply one or two coats. For best results, use a premium Corona® blended nylon/polyester brush, premium roller, or a similar product. Apply paint generously from unpainted area into wet area. This product can also be sprayed. Airless Pressure: 1500 -2500 psi Tip: 0.013-0.017