*Free Shipping*
*A Representative will reach out to upon purchase to confirm color*
Benjamin Moore® Aura Bath & Spa® interior paint is a premium-quality paint that is specially formulated to resist mildew growth in humid areas. Before Aura Bath & Spa, matte finishes were unheard of for the bathroom and other high humidity rooms. Benjamin Moore® Aura Bath & Spa now gives homeowners more options for their bathrooms, allowing them to achieve the look they truly desire.
In addition to its beautiful matte finish, Aura Bath & Spa offers a mildew resistant, extreme hide and coverage paint with fewer coats. With its Proprietary Color Lock® technology, homeowners can enjoy richer colors that stay true over time. Durable Benjamin Moore® Aura Bath & Spa® provides a protective coating that withstands repeated washings.
Features Of: Benjamin Moore® Aura Bath & Spa® Interior Latex Paint
- Extreme hide and coverage for fewer coats
- Mildew resistant for a fresh look that lasts
- Proprietary Color Lock® technology for richer colors that stay true over time
- Stands up to repeated washing with no color rub-off
- Paint and primer together
- Engineered with Gennex® Color Technology
Recommended For: Bathroom and sauna applications. New or previously painted wallboard, plaster and masonry and primed or previously painted metal and wood.
Coverage: 350 – 400 Sq. Ft./gal
Dry Times:
- To touch: 1 hour
- Recoat: 1 hour
Additional Info:
- Available Colors: Available in thousands of colors
- Sheen (or Gloss): Matte
- Cleanup: Soap and Water
- Resin Type: Proprietary 100% Acrylic
- Recommended Use: Interior
- MPI Rating: N/A
- VOC Level: 0.0
Primer/Finish Systems:
Aura® Bath & Spa Matte Finish is self priming on most surfaces. Two coats of Aura® Bath & Spa is recommended on all surfaces for best results. Note: For certain deep colors, Aura® Color Foundation must be used to achieve maximum hide and the desired topcoat color.
Wood and Engineered Wood Products: Primer: Fresh Start® Multi-Purpose Latex Primer (N023) or Fresh Start® High-Hiding All Purpose Primer (046) Finish: 2 coats Aura Bath & Spa® Interior Latex Paint
Bleeding woods such as cedar and redwood: Primer: 1 – 2 coats of Fresh Start® High-Hiding All Purpose Primer (046) Finish: 2 coats Aura Bath & Spa® Interior Latex Paint
Plaster/Wallboard: Primer/Finish: 2 coats of Aura® Bath & Spa Matte Finish (532)
Rough or Pitted Masonry: Primer: Ultra Spec® Masonry Interior/Exterior Hi-Build Block Filler (571) Finish: 2 coats of Aura® Bath & Spa Matte Finish (532) Smooth Poured or Precast Concrete: Primer/Finish: 2 coats of Aura Bath & Spa® Interior Latex Paint
Ferrous Metal (Steel & Iron): Primer: Ultra Spec® HP Acrylic Metal Primer (HP04) Finish: 2 coats of Aura Bath & Spa® Interior Latex Paint
Non-Ferrous Metal (Galvanized & Aluminum): All new metal surfaces must be thoroughly cleaned with an Oil & Grease Emulsifier Corotech® V600 to remove contaminants. New shiny non-ferrous metal surfaces that will be subject to abrasion should be dulled with very fine sandpaper or a synthetic steel wool pad to promote adhesion. Primer/Finish: 2 coats of Aura Bath & Spa® Interior Latex Paint
Repaint, All Substrates: Prime bare areas with the product recommended for the substrate above.
Application:
Mixing of Paint: Stir thoroughly before and during use. Use the same brushing techniques as you would for any low-VOC interior coating. Benjamin Moore recommends an extra firm nylon polyester brush for best results. Aura® offers excellent flow and leveling. Do not over brush in the attempt to smooth out brush marks. We recommend the Benjamin Moore® Aura® shed-resistant, 3/8" nap roller cover for best results. Aura® dries faster than other acrylic paints, so avoid lap marks by maintaining a wet edge. Roll out vertical sections in 3' to 4' widths. If your edge begins to dry or you see that you missed a spot and the paint is already setting up, allow it to dry completely before touching up that area. This product can also be sprayed. Spray: Airless Pressure: 1000 - 2000 psi Tip: 0.013-0.017