Skip to content
Benjamin Moore® Industrial Paint

Benjamin Moore® Ultra Spec® HP DTM Acrylic

by Benjamin Moore®
$77.00
Size
Sheen
*Free Delivery*
*A representative will reach out upon purchase to confirm color*
Benjamin Moore® Ultra Spec® HP DTM Acrylic enamels provide excellent rust inhibition for superior corrosion control and protection for metal substrates. Ultra Spec® HP DTM's easy application and improved color retention make it a go to for commercial and professional projects. The products fast dry characteristics also contribute in helping quick turn over.  
Features Of: Benjamin Moore® Ultra Spec® HP DTM Acrylic
  • Direct to metal application
  • Improved gloss and color retention
  • Easy application
  • Provides superior rust inhibition and control
  • Primer and finish coat
  • Fast dry
  • Excellent adhesion
  • MPI: 114, 154, 164
  • Engineered with Gennex® Color Technology

Recommended For: General maintenance interior or exterior surfaces, Ferrous or non-ferrous metal, doors, railings, steel, wood, roof decks, equipment, fencing. This product is very popular for industrial or commercial properties. 

Coverage: 320 sq.ft./gal

Dry Times:

  • To touch: 1 hour
  • Recoat: 4 hours

More Information: 

  • Available Colors: All Colors, An assortment of Ready Mixed Whites
  • Sheen (or Gloss): Eggshell
  • Cleanup: Soap and Water
  • Resin Type: Acrylic Blended Latex
  • Recommended Use: Interior
  • MPI Rating: 44
  • VOC Level: 144.0

 

Primer/Finish Systems: 

Ultra Spec® HP DTM Acrylic is self-priming on properly prepared ferrous and non-ferrous metal substrates. New surfaces should be fully primed, and previously painted surfaces may be primed or spot primed as necessary.

Ferrous Metal Surfaces (Iron & Steel): Finish: 2 coats Ultra Spec® HP DTM Acrylic Non-Ferrous Metal (Galvanized & Aluminum): All new non-ferrous metal surfaces must be thoroughly cleaned with an Oil & Grease Emulsifier Corotech® V600 to remove contaminants. Finish: 1 or 2 coats Ultra Spec® HP DTM Acrylic

Masonry, Smooth Poured or Precast Concrete: Primer: Ultra Spec® Masonry Interior / Exterior 100% Acrylic Masonry Sealer (608) Finish: 1 or 2 coats Ultra Spec® HP DTM Acrylic

Masonry, Rough or Pitted: Primer: Ultra Spec® Masonry Interior/Exterior Hi-Build Block Filler (571) Finish: 1 or 2 coats Ultra Spec® HP DTM Acrylic

Plaster and Wallboard: All plaster surfaces must be thoroughly cured for at least 30 days. Drywall surfaces must be free of sanding dust. Primer: Fresh Start® Multi-Purpose Latex Primer (N023) Finish: 1 or 2 coats Ultra Spec® HP DTM Acrylic

Wood, and engineered wood products: Primer: Fresh Start® Multi-Purpose Latex Primer (N023) Finish: 1 or 2 coats Ultra Spec® HP DTM Acrylic

Bleeding Type Woods, (Redwood and Cedar): Primer: Fresh Start® Multi-Purpose Oil Based Primer (024) or 1-2 coats of Fresh Start® High-Hiding All Purpose Primer (046) may be used Finish: 1 or 2 coats Ultra Spec® HP DTM Acrylic

Application: 

Mixing of Paint: Stir thoroughly before and occasionally during use.A one-coat application protects and preserves; two coats provides greater durability. Apply with an all-purpose synthetic brush, short nap roller, or spray. Spray, Airless: Fluid Pressure — 1,500 to 2,500 PSI; .013 - .017 Orifice